This Capitol Reef National Park 100% embroidered patch is 3.0" H x 3.0" W and comes ready to just iron-on.
The illustration was inspired during our time visiting and Illustrating all 63 National Parks of America as Full_Time nomads, check out this epic story at nationalparkquest.com
-------------------------------------------------------------------------
INSTRUCTIONS:
Here’s how to put your patch onto a jacket, backpack, or any other material that you want to stick this on. Preferably use denim or cotton.
1) Heat the surface where you want to apply the patch on using an Iron.
2) Place the patch on the desired spot.
3) COVER THE PATCH WITH A THIN PIECE OF CLOTH TO AVOID BURNING.
4) Press the iron firmly against the patch (straight down, don’t go back and forth).
5) Let it cool down so the glue properly seals the patch and fabric.
*If possible, repeat from the other side of the material for extra strength.
*Fabrics like Polyester and Nylon will melt in high temperatures
*For super permanent secure adornment we recommend sewing the edges
-------------------------------------------------------------------------
And it's sure to be your next favorite patch too!
Copyright © by HikeAndDraw 2018. All rights reserved
